High Performance LTR Trunking
The Raider brings the popular LTR trunking protocol to your system without the high price of other logic controllers. The Raider has just the features you need to make your LTR system a success.
Single period airtime logging for all 5000 ID codes.
Supports 38 EIA subaudible CTCSS tones and up to 20 user selectable DCS codes per channel.
Special features allow the individual activation of the Repeater Disable Function and the LTR® Idle message updates. The functions may be activated per channel on a time selectable basis.
Morse code identifier supported with the capability of programming a separate Call Sign on a per channel basis.
When operating in the conventional mode, the Drop Timer will hold the transmitter keyed up and busy out the LTR® bus, but will not encode a CTCSS tone or DCS code. After the drop timer expires the channel will become idle.
When operating in the conventional mode, the user adjustable Hang Timer keeps the repeater transmitter keyed up while continuing to output the decoded CTCSS tone or DCS code.
User programmable Fade Timer allows the channel to remain active should there be a momentary loss of LTR® data during decode at the repeater site.
Test switch provided for tuning and alignment. All level adjustments, test points, and dip switches are readily accessible on rear panel. Separate data input and output inversion switches for DCS and LTR®. Separate data level settings for LTR® data and CTCSS/DCS.
ID Code Validation
Provides complete validation for an entire trunking system of up to 20 channels.
Repeater Disable - Trident’s exclusive Repeater Disable Function helps to protect co-channel users from interference by “locking-out” the affected channel during the time it is being used by another repeater or system. This is especially useful in UHF trunking applications.
Password protected modem support for downloading of logged airtime and upload/download of system configuration.