Raider II
High Performance LTR Trunking with Data
PRODUCT BROCHURE

The Raider II from Trident Micro Systems brings a new level of performance to LTR and Conventional system owners. The Raider II provides all the features of the Raider with the addition of data features that offer fleet owners the ability to view statistical information on every mobile they have on the road. The TrAVL web site provides details on a mobile’s location along with the ability to send and receive text messages, monitor geofences, speed limits, and more.

Data Collection
The Raider II is a fully functioning LTR controller that has been enhanced with the Trident Data capability. Additionally, it acts as the data extraction point, where data is taken from the system and fed to the server.

The Raider II comes bundled with Trident’s unique TrAVL Bridge software, which manages the connection to the site regardless of connection type. The TrAVL Bridge supports direct serial connection, serial connection via dial-up modem, or serial connection via Ethernet to serial converters such as the Trident ES-2. All data collected by the TrAVL Bridge is then transported to either the TrAVL Server via the Internet, or to your own private server.

Voice and Data
The Raider II allows for total voice communications as well as data transport on the same channel on a shared basis. When the channel is polling data subscribers it merely appears busy to other units on that channel.

Airtime Logging
Supports Single Period Airtime Logging for all 5000 ID codes.

CTCSS/DCS
Supports 38 EIA subaudible CTCSS tones and up to 20 user selectable DCS codes per channel.

Custom Programming
Special features allow the individual activation of the Repeater Disable Function and the LTR Idle message updates. The functions may be activated per channel on a time selectable basis.

CWID
Morse code identifier supported with the capability of programming a separate Call Sign on a per channel basis.

Drop Timer
When operating in the conventional mode, the Drop Timer will hold the transmitter keyed up and busy out the LTR bus, but will not encode a CTCSS tone or DCS code. After the drop timer expires the channel will become idle.

ID Code Validation
Provides complete validation for an entire trunking system of up to 20 channels.

Fade Timer
User programmable Fade Timer allows the channel to remain active should there be a momentary loss of LTR data during decode at the repeater site.

Hang Timer
When operating in the conventional mode, the user adjustable Hang Timer keeps the repeater transmitter keyed up while continuing to output the decoded CTCSS tone or DCS code.

Easy Interface
Test switch provided for tuning and alignment. All level adjustments, test points, and dip switches are readily accessible on rear panel. Separate data input and output inversion switches for DCS and LTR. Separate data level settings for LTR data and CTCSS/DCS.

Repeater Disable
Trident’s exclusive Repeater Disable Function helps to protect co-channel users from interference by “locking-out” the affected channel during the time it is being used by another repeater or system. This is especially useful in UHF trunking applications.

System Management
Password protected modem support for downloading of logged airtime and upload/download of system configuration.